Warewash

WCM1001-WLD
Sprayarm Bearing – Welded

ADS Ref #81-6206

$12.10 ea.

This bearing features the same sturdy three part construction as the 3 Pc bearing but is welded in place of the retaining ring and is NOT rebuildable. Otherwise, it has the same specifications as the 3 Pc bearing, including 316 stainless  steel ball bearings, but at a lower price.

WCM 1150-Assy
Sprayarm Bearing – 2 Pc.

CMA Ref #341_00

ADS Ref #81-6210

S10.80 ea.

This  bearing is a two part, more economical assembly used inthe basic CMA, Energy Mizer and ADS dishwashers. Thisbearing is inter -changeable with WCM1001-Assy andWCM1 001-WLD.

WCM1001-8

Viton Seal (U-cup)

$1.25ea.

This is a replacement seal used in Sprayarm Bearing Part #’s: WCM1001 -Sealed and WCM5001-Sealed.

WCM1001-7

Split sleeve – Nylon

$1.29 ea.

This is a protective sleeve used to protect the sprayarm bearing from damage caused by thumbscrews. It will also protect the thumbscrew from damage caused by over tightening(mushrooming).

WCM5001-4

Poly Gasket

$.95 ea.

This is a replacement Gasket used on under counter threaded sprayarm bearings.

WCM 250

PVC Pick Up Tubes -1/4

$1.40 ea  -0-11

$1.70 ea -12-17

$2.50 ea -18-30

$2.95 ea -31-40

Available  in various sizes:

0 – 11 inches

12 – 17 inchesover 18 inches

CM500

pvc Pick Up Tube – 1/2″

$1.40 ea. – 0″-11″

$1.70 ea. – 2″-17″

$2.50 ea. – 18″-30″

$2.95 ea. – 31″-40″

Available  in various sizes:

0 – 11 inches

12 – 17 inches

over 18 inches

WCM1041-Assy
Sprayarm Bearing – Bums Winged

S18.50 ea.

This  is a replacement bearing for Burns type dishwashers.

WCM5268-SS
chemical Injection Tower (3/4″ NPT)

539.00 ea.

Chemical Injection Tower with 3/4″ NPT ends and 1 /8″ NPTcrossholes. Stainless Steel.

WCM1022-Assy
Sprayarm Assembly-23”

$29.50 ea.

This is a replacement stainless steel sprayarm assemply to that used in Burns double  tank dishwashers. Sprayarm assembly comes complete with stainless steel end caps.

WCM5268-Hydex
Chemical Injections Tower(3/4”NPT)

$39.00 ea.

Chemical Injection Tower with 3/4” NPT ends 1/8” NPT crossholes. Hydex Plastics.

WCM1021-Assy
Sprayarm Assembly-21”

$29.50 ea.

This is a replacement stainless steel sprayarm assembly to that used in Burns double tank dishwashers. Sprayarm assembly comes complete with stainless steel and caps.

RYK1150-Assy
Sprayarm Bearing – Bayonet

$21.00 ea.

This is a replacement sprayarm bearing to that used in most Rykoff dishwashers. Used in spraybase with lockpin for grooved bayonet connections.

RYK2001-Assy
Sprayarm Assembly – 23”

$29.50 ea.

This is a replacement stainless steel sprayarm assembly to that used in Rykoff single tank dishwashers. Sprayarm assembly comes complete with stainless steel end cops.

RYK2002-Assy
Sprayarm Assembly – 20”

$29.50 ea.

This is a replacement stainless steel sprayarm assembly to that used in Rykoff single tank dishwashers. Sprayarm assembly comes complete with stainless steel end cops.

WCM6175
Nozzle -1/8 NPT V-Jet 8010 Brass

$1.95 ea.

Orifice diameter  – .050 x 45 degree

WCM6175-4
Nozzle -1/8 NPT V-Jet 8015 Brass

$1.95 ea.

Orifice diameter  – .060 x 45 degree

WCM6175-9
Nozzle -1/8 NPT V-Jet 8015 Stainless Steel

$2.95 ea. – 303 Stainless
$3.95 ea. – 316 Stainless

Orifice diameter – .060 x 45 degree

WCM6175-2
Nozzle -1/8 NPT V-Jet 8010 Stainless Steel

$2.95 ea. – 303 Stainless
$3.95 ea. – 316 Stainless

Orifice diameter – .050 x 45 degree

WCM6175-5
Nozzle-1/8 NPT V-Jet 8004 Brass

$2.50 .ea

Orifice diameter  – .025 x 45 degree

WCM6175-12
Nozzle-1/8 NPT V-Jet 8020 Brass

$1.95 ea.

Orifice diameter  – .080 x 60 degree

WCM6175-3
Nozzle-1/8 NPT V-Jet 8002 Brass

$2.50 ea.

Orifice diameter  – .035 x 45 degree

WCM6175-6
Nozzle-1/8 NPT V-Jet 8002 Stainless Steel

$3.50 ea. – 303 Stainless
$4.95 ea. – 316 Stainless

Orifice diameter  – .035 x 45 degree

WCM6175-13
Nozzle-1/8 NPT V-Jet 8020 Stainless Steel

$2.95 ea. – 303 Stainless
$3.95 ea. – 316 Stainless

Orifice diameter  – .080 x 45 degree